Master software

N O	MASTER SOFTWARE	RECEIVERS COMPATIBLE	CATATAN
1.	STARSAT SR X-1500 SR X-1600 SR X- 1900	Manhattan Omax-R100 Telecom1500 SUPER MKII Dream 2000 Comag sl 55 Dansat G9+8+7 Dansat GX: DVB-S, 4000 ch. Univers U-4105 Univers U4101 – 4102 Citizen 2000 Citizen Sat DVB-5500 Ultra Starvision 5100/ 5200/ 5300/ 5400 Boca Chess SL 55 DSR Premier PRS-10100 Premier PRS-10200 Premier PRS-10300 Premier PRS-10350 Preisner SRD-1000 S/B Univers U4101/ 4102 Univers U-4105 : FTE Maximal IRD 120 FTE Maximal IRD 390 & 390M FTE Maximal IRD 410 FTE Maximal IRD 420 & 420M FTE Maximal IRD 420SM FTE Maximal IRD 450 CI Beausat BSR-900/ Beausat BSR-905/ Beausat BSR-911 S/BSR-2003 Citizen 2000 Boca DSR 103/DSR 104 OTA Citizen Sat DVB-5500 Ultra Comag DVB III FTA Comag DVB III FTA OTA Comag FTA 311 Comag SL-55 Porty I SatConn DVB-2003 FTA Satconn DVB 2000 FTA SKT SDR-200/SDR-201/DTR-201 StarSat SR-X 1500D StarSat SR-X 1600D TokyoSat DVB-2300 FTA New Star 201, DVB 5013 oraz DVB 5013M Sanyo Gold Sanyo Plus S-DVB 9600 DVB-S, 5000 Ch., FTA Starsat SR-X2700CI: DVB-S, 2x Common Interface	to load keys, use this method (Transponder Editer ) to make appropriate key file for your loader (COM Upgrade)depending on softcam.bin file, u should use .bin key file and use the mentoined program to convert it to the right extension then use the loader(COM Upgrade) to load it. Clones for this family (will be updated soon) To turn off the receiver's your bootloader application, loading the software and switch if this rule is to avoid flash damage. Try after you perform a successful cloning, restart your receiver or factory settings.
2.	STARSAT SR X-1500 SR X-1600 SR X- 1900	=Topsat 5000 Ultra =topsat5000(pal) =Astrovox 160 SUPER =Astrovox VSR 2500 =beausat 2004 =echostar 900 fta =Coship 2300 =Tboston4500 =Axil ad600 =Truman 9000 =Strong 3680 =Iris 3000= Iris3300 =Bigsat 5000=Bigsat 8000 =Visiosat TVS 4500 =Koscom DSR 5002 =Maxtronics DSR 5200 = Digisky DGS2300 = Condor 4000c 4500	Clones for this family (will be updated soon) To turn off the receiver's your bootloader application, loading the software and switch if this rule is to avoid flash damage. Try after you perform a successful cloning, restart your receiver or factory settings.
3.	Starsat 190 super	= Golden Interstar 8001 = Golden Interstar 8001s etc
4.	Starsat 120	Astra 9000
5.	Starsat 150	Astra 9800
6.	Starsat 120-130-150 PLUS 1M	Condor 5000
7.	Starsat 200 ci	Condor 5000CI
8.	Starsat 200	1.Astra 9500 2.Hivision 5000
9.	Starsat 5500D	truman 100 plus
10	Starsat 550D	truman 100
11	starsat AG-R5500D	Truman 100 plus = truman 150 ultra =TRUMAN 150
12	starsat AG-R5500D	starsat 5000 DSN_GR6300 Yumatu_MX astrasat-magnom Startrex 550 Samsung K864 = Neosat 1600

Create a Simple VHF / Aircraft Band Receiver

The circuit is very simple, but necessary experience in assembling the recipient this. This circuit can receive the frequencies from 140 to 150 MHz covering the frequency of 2 meters.There is a super-regenerative detector that can set this to be very sensitive receiver. This receiver can receive the transmission signal from a transmitter that is 10th mile, with only using 6-inch long cable.

Recipients must be input into the metal box and to tuningnya using plastic knob. Do not ever assembled on the IC board or veroboard.

Windings L1 and L2 must be heavily using size 18 SWG copper wire to wire Click here to see the table consists of one winding L1, and L2 4 Circumference Conductor winding length (7 / 8 inch). Both these lilitabn air cored with a diameter of ½ inch. L2 should be in a relationship from the L1 point. By controlling the coil L2 spaces, will change the frequency, then you should do some experiments and find a desired frequency. L3 is not too critical, consisting of 30 windings of copper wire 26 SWG size with air core diammeter ¼ inch.

After all the well-Threaded and soldered perkawatannya connection, connect the output to the audio amplifier. Amplifier can use IC LM386 for the audio amplifier, or similar. Use a suitable antenna to the transmitter. Rotate the 25K potentiometer size, until the sound of a hiss that is strong enough, this marks the series has worked well.

Hissing sound stops when no signal is captured, from any signal. Set the variable capacitor 10 pF to find a relay station. In order to receive the desired signal, then the coils need to be adjusted. The frequency will be higher when the L2 stretched.